Commercial epoxy flooring gives a shop, clinic, kitchen or showroom a seamless floor with no grout lines to hold dirt, no tiles to lift and nothing for a mop to catch on. We phase the work around your opening hours so you keep trading, and we give you a cure schedule you can put in a calendar rather than a vague promise.
A commercial floor has to look right and it has to survive being cleaned properly, several times a day, with something stronger than water.
Tile and vinyl fail at the joints. A resin floor has no joints.
Storefronts and showrooms along London Road and Exmouth Street, where what is underfoot is part of the first impression.
Clinics, veterinary practices and treatment rooms that need a surface that can be disinfected without lifting.
Commercial kitchens and food prep areas, where a coved edge and an anti-slip aggregate are usually required rather than optional.
Service bays, tyre shops and dealership workshops that take oil, brake fluid and lifting equipment.
Gyms, studios and clubhouses where the floor is walked on all day in street shoes.
We split the floor into sections and coat one at a time so part of the space stays open.
Where a full shutdown is unavoidable, we work nights and weekends and give you a firm return-to-service time.
Polyaspartic top coats cure quickly, which is usually what makes an overnight turnaround possible at all.
We tell you the real numbers up front. If your floor genuinely needs three days, you will hear that before you book, not on day two.
Anti-slip aggregate is specified to the room, and a kitchen and a showroom do not get the same one.
Coved skirting is available where a wash-down detail or an inspection standard calls for it.
Line marking, bay numbers and hazard zones go in as part of the build, not as paint applied over the top later.
You get a written specification you can hand to an inspector, an insurer or a landlord.
Tell us the trade, the square footage and the hours you keep. Call +1 226-406-4401 and we will come out, price it properly and build the schedule around your business.
Houses, shops and plants right across the county, from Point Edward down the river to Courtright.
A garage floor coating shuts the concrete off from road salt, brine and meltwater. Letting those in is what finishes most garage floors in this city. The slab is opened up, made good, and given a chip system under a polyaspartic wear layer, built for concrete that gets driven on right through the winter.
View Garage Floor Coating
A flake system is a resin base with vinyl chip thrown into it wet, then locked under a clear polyaspartic wear layer. It is the system we install most often in Sarnia because the texture gives grip on a floor that spends half the year wet, and the chip pattern hides the dirt a garage actually collects.
View Flake Epoxy Flooring
Polyaspartic is a resin that keeps hardening in cold that shuts epoxy down, reaches service strength in hours rather than days, and holds its colour under ultraviolet light. It is our standard top coat in Sarnia, and on some floors we build the whole system from it, because a slab in an unheated garage here sits below epoxy's working range for half the year.
View Polyaspartic Floor Coating
Concrete floor coating covers everything we install on a bare slab, whether it ends up as a flake floor, a solid colour or a plain sealed surface. The job is the same underneath: open the concrete, repair it, test it, and put a resin system on it that keeps water out. On Sarnia clay, keeping water out is the whole point.
View Concrete Floor Coating
Basement floor coating takes a cold, dusty slab and leaves you with a sealed surface you can mop and a room that is noticeably brighter. In Sarnia it is also the job where preparation matters most, because the clay under this city holds water against your basement slab and drives it upward as vapour. We test every basement before we quote, and the reading decides what we can install.
View Basement Floor Coating
Industrial and warehouse flooring is specified around what actually happens on the floor: forklift traffic, dropped steel, solvent and chemical spills, hot work and regular wash-down. Sarnia has three refineries and more than thirty chemical plants, plus the fabricators, machine shops and contractors that serve them, and those floors need a different build from a garage.
View Industrial and Warehouse Flooring
Epoxy floor repair and recoating is for floors that have started peeling, bubbling, chalking or lifting off in sheets. The failed build comes off, we work out what killed it, the concrete gets repaired, and the replacement is chosen to beat whatever that was. In Sarnia the cause is usually one of two things, and neither of them is the colour you chose.
View Epoxy Floor Repair and Recoating
Patio and outdoor concrete coating seals porches, walkways, pool surrounds and covered patios with a UV-stable polyaspartic and an anti-slip aggregate. Outdoor concrete in Sarnia takes the full freeze-thaw cycle with nothing above it to moderate the temperature, plus wind and driven rain off Lake Huron, so the specification is not the same as an indoor floor.
View Patio and Outdoor Concrete Coating
Metallic floors are made by working reflective pigment through clear resin while it is still moving, so the result has depth and drift in it instead of one flat colour. No two are the same. It belongs indoors, in rooms that get looked at and spent time in, rather than in a garage that parks a salty vehicle every night.
View Metallic Epoxy FlooringHave us out to look at the concrete. You leave with a specification and a price, both on paper.
Room, rough dimensions, and what happens on the concrete. From that we can get a visit booked and put a real price together. If you would sooner just talk, +1 226-406-4401. Prefer to talk it through? Call +1 226-406-4401.
