Metallic floors are made by working reflective pigment through clear resin while it is still moving, so the result has depth and drift in it instead of one flat colour. No two are the same. It belongs indoors, in rooms that get looked at and spent time in, rather than in a garage that parks a salty vehicle every night.
The pigment is moved deliberately while the resin is still open, which is what produces the marbled effect.
It is a hand-worked finish, so it takes longer than a flake floor and it costs more.
Finished basements, particularly bars, lounges and games rooms.
Retail floors and showrooms where the floor is genuinely part of the presentation.
Offices, studios and reception areas.
Feature rooms in a house, and occasionally a display garage that is not used as a working one.
A daily-use garage. Metallic has no flake in it, so it has less texture, and a wet salty boot on a high gloss floor is not a good combination.
Anywhere outdoors, or anywhere in strong direct sunlight.
Industrial and warehouse floors, which need a system chosen for abrasion and impact rather than appearance.
Any slab with a high moisture reading, and metallic is no more forgiving of that than anything else. The test still comes first.
Expect the top of the Ontario range, roughly eight to twelve dollars a square foot, and note that most of that gap is labour rather than materials.
The design affects it too. A subtle single-tone marble is quicker than a multi-colour pour with a lot of movement in it.
Anti-slip aggregate can be added and does change the look, so it is a decision to make together rather than an afterthought.
Metallic is a floor you should look at before you buy. Call +1 226-406-4401 and we will bring samples out, talk through the room and price it properly.
Houses, shops and plants right across the county, from Point Edward down the river to Courtright.
A garage floor coating shuts the concrete off from road salt, brine and meltwater. Letting those in is what finishes most garage floors in this city. The slab is opened up, made good, and given a chip system under a polyaspartic wear layer, built for concrete that gets driven on right through the winter.
View Garage Floor Coating
A flake system is a resin base with vinyl chip thrown into it wet, then locked under a clear polyaspartic wear layer. It is the system we install most often in Sarnia because the texture gives grip on a floor that spends half the year wet, and the chip pattern hides the dirt a garage actually collects.
View Flake Epoxy Flooring
Polyaspartic is a resin that keeps hardening in cold that shuts epoxy down, reaches service strength in hours rather than days, and holds its colour under ultraviolet light. It is our standard top coat in Sarnia, and on some floors we build the whole system from it, because a slab in an unheated garage here sits below epoxy's working range for half the year.
View Polyaspartic Floor Coating
Concrete floor coating covers everything we install on a bare slab, whether it ends up as a flake floor, a solid colour or a plain sealed surface. The job is the same underneath: open the concrete, repair it, test it, and put a resin system on it that keeps water out. On Sarnia clay, keeping water out is the whole point.
View Concrete Floor Coating
Basement floor coating takes a cold, dusty slab and leaves you with a sealed surface you can mop and a room that is noticeably brighter. In Sarnia it is also the job where preparation matters most, because the clay under this city holds water against your basement slab and drives it upward as vapour. We test every basement before we quote, and the reading decides what we can install.
View Basement Floor Coating
Commercial epoxy flooring gives a shop, clinic, kitchen or showroom a seamless floor with no grout lines to hold dirt, no tiles to lift and nothing for a mop to catch on. We phase the work around your opening hours so you keep trading, and we give you a cure schedule you can put in a calendar rather than a vague promise.
View Commercial Epoxy Flooring
Industrial and warehouse flooring is specified around what actually happens on the floor: forklift traffic, dropped steel, solvent and chemical spills, hot work and regular wash-down. Sarnia has three refineries and more than thirty chemical plants, plus the fabricators, machine shops and contractors that serve them, and those floors need a different build from a garage.
View Industrial and Warehouse Flooring
Epoxy floor repair and recoating is for floors that have started peeling, bubbling, chalking or lifting off in sheets. The failed build comes off, we work out what killed it, the concrete gets repaired, and the replacement is chosen to beat whatever that was. In Sarnia the cause is usually one of two things, and neither of them is the colour you chose.
View Epoxy Floor Repair and Recoating
Patio and outdoor concrete coating seals porches, walkways, pool surrounds and covered patios with a UV-stable polyaspartic and an anti-slip aggregate. Outdoor concrete in Sarnia takes the full freeze-thaw cycle with nothing above it to moderate the temperature, plus wind and driven rain off Lake Huron, so the specification is not the same as an indoor floor.
View Patio and Outdoor Concrete CoatingHave us out to look at the concrete. You leave with a specification and a price, both on paper.
Room, rough dimensions, and what happens on the concrete. From that we can get a visit booked and put a real price together. If you would sooner just talk, +1 226-406-4401. Prefer to talk it through? Call +1 226-406-4401.
